Offer free source of XENTRY Diagnostics OpenShell – PassThru (OpenShell 09/2020 Final – XDOS 20.9.4 ).

– XENTRY Diagnostics OpenShell 09/2020 (20.9.4) – final version –

– XENTRY Diagnostics PassThru 09/2020 (20.9.3) – final version –

Credits to @ Smallville.

(Try on your own risk)

XDOS OpenShell 2020-09 ( 20.9.4 )

https://mega.nz/file/hmoHXKoS#HYXsIOV4alSoZ7onsasz1GYWH-TMfgpeonyNwgVn1TE

XDOS 2020.09 (20.9.4) direct_link – Final Version

XDOS_2020.06_(20.6.4)_direct_link

Xentry Passthru 06.2020 [20.9.3] – Torrent.rar

XDOS 2020-09 Win7 Fixed Solution

https://mega.nz/file/tmYhEKhL#ZuvICMC0sW50KHcjdQYw7vAGr0dfitdpgf9e0KoEJyU

Background_XDPad_2020-09.rar

XDOS_09.2020_Missing_Pics_Fixed_x64.rar

reliable source:Security: 100% yes

Xentry V2020.6 reliable link (ssd version)

Xentry V2020.6 reliable link (hdd version)

Software includes:

Xentry 06.2020
DAS 06.2020
EPC 11.2018
WIS 11.2018
SDmedia offline 2014
HHT-WIN
Vediamo 5.01.01
Vediamo Database 2019
Star Finder 2008 & 2016
PL73 2019
DTS Monaco 8.13.029

Enjoy!

http://blog.obdexpress.co.uk/2020/08/28/xentry-diagnostics-openshell-09-2020-xdos/

Posted by: mbbenzstar at 07:39 AM | Comments (2) | Add Comment
Post contains 127 words, total size 16 kb.

Have a Mercedes W124 2.5d from 1992, W124 2.0 petrol from 1994 and a W212 E350 CDI 10 plate to diagnose, not sure which Xentry Kits to buy, sd connect c4 is the best.

Car model:

A Mercedes W124 2.5d from 1992, W124 2.0 petrol from 1994 and a W212 E350 cdi 10 plate.

Purpose:

I would like to look into them a bit deeper and see what else i can find within them.

Xentry Kits for choice:

MB star C3 (old story)

sd connect c4 (Best)

Star diagnostic C5 (cheaper)

Reviews:

1. sdconnect c4 will be the best option (c3 is already a story), here is my opinion.

2. SD C4 would be your choose . C3 is older hardware , sd c5 (chine ones ) actually is c4 inside no difference .

3. SD C4, or MB VCI (C6) will work Good.

4. More Xentry Kits reviews at

http://blog.obdexpress.co.uk/2019/10/14/benz-c4-c5-multiplexer-vci-clone-c6/

5. For any more other software than Xentry, please refer to sdc4 plus vs. c6 vs. c5 vs. ecom:

http://blog.obdexpress.co.uk/2019/08/08/doip-sd-c4-plus-vs-vxdiag-benz-c6-vs-sdconnect-c5-vs-benz-ecom/

Posted by: mbbenzstar at 03:56 AM | Comments (1) | Add Comment
Post contains 176 words, total size 2 kb.

Question:Is it possible to updatesd connect C4without batteries, because I am damaged and batteries do not work !!!.

Answer: It can be done perfectly.

If you need to update an SD Connect and you do not have batteries or the power supply/charging circuit is damaged, you only have to edit the toolkit.ini file, modifying the following lines so that the supply and/or battery voltage is lower to the real (it would be enough to set them to zero)

Obviously make sure you havea stable and sufficient external supply.

[SoftwareUpdate]
;
; Voltages necessary for SDconnect firmware updates. These values are only for the pre-check of the toolkit, the values will be checked by the update process again
;
MinUpdateVoltageVBatt=7200
MinUpdateVoltageVExt=11000
;

A reboot is required for the new settings to take effect (Probably a Tkserver restart is enough)

Credits to @ gcs190

Question: In which cases an update is urgent?

What is the last version?

Answer: It has not been updated for a long time, generally it is not necessary to update it, if at first use if it was not. Then I put the latest versions.

Good to know:

1. When update the c4 firmware:

Only the best sdconnect C4 plus (supports DoIP)firmware update does not need the battery, here you can go to own one:

https://www.obdexpress.co.uk/wholesale/mb-sd-c4-doip-diagnostic-tool.html

2. When testing the car.

All versions ofmb sd connect c4does not need the battery.

Tips on how to save the battery consumption:

Tip 1: Try to use mux on lan(without wireless card inserted)

Try to use mux on lan(without wireless card inserted),and you will have no more ‘check batteries’ error on display.
seems that error came from heating the wifi card and not correctly drainage from hot air.

Added to this, using mux without wifi cardsave around0.4v consumption, xentry will see around 0.4v more voltage,so safer voltage for programming,etc… I dont have wifi card installed, better work always with lan, i dont see too much work in connecting just a cable when making a work.

i think heat with wifi card is a problem beacouse card itself is heating adding to the heat that pcb’s itself produces,with no card installed less heat inside the mux andheat can go exit through the free slot of card, making a grill on the grey plastic piece will help allowing heat to go out of mux, surely extending its life.

Tip 2: remove the rechargeable batteries when not using

I did not remove the rechargeable batteries after use I noticed that some of the inserted batteries went dead after a while. This was (my personal opinion) because of the continuous battery drainage that pulled the voltage so low the batteries eventually got broken.

Tip 3: always had with empty batteries often

I always had with empty batteries oftenbecause the device was in standby mode and in the course of time were empty, I have considered a solution and indeed an on and off switch after the device goes down in standby mode, I turn it off thus it can not consume power and keep the batteries.

Tip 4: connecting the mux to a power source

When not in use connecting the mux to a power source (battery charger).This way the batteries are always getting charged but I’m not sure if this is a good idea?

Good luck!

http://blog.obdexpress.co.uk/2020/08/04/how-to-update-sd-connect-c4-without-batteries/

Posted by: mbbenzstar at 02:57 AM | Comments (4) | Add Comment
Post contains 562 words, total size 18 kb.